Address: block E, 18th floor, kaipeng international
building, no.425, republican new road, Shanghai
Phone: 021-66288138 | 021-66288218 | 021-36174138
Zip code: 200070
Mail box: email@example.com
Copyright ©Shanghai jhao sauna swimming pool equipment co. LTD All rights reserved.
In the semi-program full-flow ozone disinfection method, it is necessary to set up activated carbon adsorption filtration to remove excess. At the same time, it can deodorize, deodorize and remove organic matter in water, and reduce harmful by-products such as trichlorobenzene formed during rehydration. Methane, chloroacetic acid, etc., and further reduce the turbidity of the pool water, manually control the backwash according to the inlet and outlet pressure difference and running time.
The adsorption tank should meet the following requirements:
1. It adopts granular activated carbon and has the characteristics of good adsorption performance, high mechanical strength, good chemical stability and strong regeneration ability.
2. Activated carbon particle size 0.9-1.mm range, specific surface area > 900rm2/g;
3. The effective thickness of the adsorption layer should not be less than the filtration rate range of the ozone adsorption tank should be 30-35m/h;
LCYO-XF series ozone activated carbon adsorption tank is made of 316L stainless steel material with high anti-corrosion performance, anti-ozone and chloride ion double corrosion, involving pressure of 0.6Mpa. The slit type water collecting filter rod is used to make the cloth water area larger and the water flow more uniform. The good physical and chemical properties of activated carbon make the water quality after adsorption and filtration more stable. There is an automatic exhaust valve at the top to send the residual ozone to the residual ozone eliminator to reduce it to O2 and then safely discharge into the outside atmosphere. The tank body is provided with a manhole for easy maintenance.
Vertical stainless steel activated carbon adsorption tank technical parameter table