Acrylic: (Acrylic, Jacques, Arylic), chemical name: polymethyl methacrylate (PMMA), is a product extracted from deep-sea oil, its research and development has a history of more than 100 years. Because of its excellent toughness and high transmittance. Jacquard's color can be very beautiful. It is very similar to natural crystal both in appearance and texture. It is better than crystal in permeability. It is the best technological material to replace crystal. Anti-fragmentation is 12-18 times as much as glass. After high-tech special technology treatment, Jacqueline has several times the hardness of ordinary glass. It has scratch resistance and scratch resistance. Its hand feel is smooth and smooth, without sweat stains and fingerprints. The sources of acrylic materials are divided into three categories: 1. Pure imported acrylic sheets; 2. Domestic acrylic sheets; 3. Recycled acrylic sheets have different prices and service life of finished products.
Fiberglass: Fiberglass reinforced plastics, the scientific name of fiberglass reinforced plastics. It is a kind of composite material with glass fiber and its products (glass cloth, tape, felt, yarn, etc.) as reinforcing material and synthetic resin as matrix material.
The difference between acrylic swimming pool and transparent acrylic swimming pool
Polymethyl methacrylate (PMMA), commonly known as acrylic resin or acrylic resin, has many advantages, such as high transparency, low price, easy to machine and so on. PMMA is a commonly used glass substitute material. Acrylic board (acrylic board) can be divided into pure transparent board, colored transparent board and translucent board (such as color board) according to transmittance; high gloss board, mercerized board and extinction board (also called grinding board) according to surface gloss; according to performance, acrylic board can also be divided into other ordinary board, impact board, ultraviolet resistance board, smoldering board and high. Wear-resistant board and so on. Pure new transparent acrylic sheet has the following characteristics: excellent anti-ultraviolet performance, no yellowing for 10 years outdoors, no fading, loss of light, no cracking; transmittance greater than 92%, transparent and colorless cross-section; high surface hardness, comparable to aluminum and brass; excellent anti-cracking and chemical resistance; high-quality protective film, providing enough. Protection. The ordinary acrylic swimming pool uses resin fibers and modern advanced technology, seamless, one-time forming, smooth surface, hard and lightweight objects, with heat preservation, anti-bacterial, anti-aging, anti-corrosion function. It is suitable for hospitals and swimming pools to set up fixed-scale swimming pools.Material characteristics
The mainstream material is acrylic material. This paper focuses on the acrylic highly integrated children's swimming pool, which can be used in household and children's swimming pool. The product is highly integrated and does not need separate equipment room or platform drainage. It is made by 15mm acrylic casting imported from Germany. (Simple acrylic panel swimming pool for children is made by heating, softening and suction of an acrylic panel, which is only a few millimeters thick in the corner, and then used. Resin reinforcement, due to the aging of resin, acrylic panels are prone to cracking phenomenon leading to water leakage. This kind of swimming pool solves a series of problems, such as the low integration of modular combined children swimming pool, the need for separate equipment for heating, water quality can not meet the requirements, water leakage, drainage needs platform, increasing floor load and causing high risk.