Outdoor pool construction seems simple, but it is not easy to earthwork, wall painting and water filling. The building of outdoor swimming pool involves various aspects, mainly including the following aspects:
1, the hardness of water: the hardness of water should be moderate, too high will make the pool wall polycondensation, too low will erode the mortar on the wall. Hard water is water that has a calcium ion concentration of more than 250 mg/L and a alkalinity of more than 150 mg/L. The pH in hard water is relatively stable, but it should not be stabilized by increasing the hardness of the water. For hard water sources, a water softener shall be set up for pretreatment.
2. Water clarifications: water clarifications can be reflected by total soluble solids (TDS). TDS refers to the accumulation of electrically charged chemicals in a pool of water, especially when the water evaporates or is not replenished with enough fresh water. The substance is hard to see with the naked eye, but its electrical conductivity can contaminate some of the pool's components, such as pumps, pipes and filters.
3, the pH of water: the pH reflects the concentration of H+ or OH- in the pool water, the relevant provisions of our country pointed out that the pH range of pool water is 6.5 ~8.5. To ensure the proper operation of the pool, the users of the pool should pay close attention to this index and whether it meets the standard. This can be done with a simple test paper. And in order to stabilize the pH of pool water, special stabilizer should be added to keep the pH of pool water within a reasonable range.
The above is Shanghai jiehao sauna pool equipment co., LTD. The outdoor pool is our main place of summer entertainment, adding a lot of fun to our life. Of course, when building an outdoor pool, we should have a full understanding of its knowledge and strive to create a comfortable and healthy outdoor pool.